Current FlashlightNews Headlines
Translate





FlashlightNews Partners
Cree, Inc.
Bayco Products
LEDtronics, Inc.
Vortex Flashlights

Two-Component Epoxy Adhesive
Gels in 3 Minutes

Master Bond, Inc. Press Release FlashlightNews.org - 2/06/2008

Bookmark and Share

Produces durable high strength and tough bonds which are remarkably resistant to thermal cycling


EP44 two component epoxy adhesive from Master Bond

EP44 two component epoxy adhesive from Master Bond

HACKENSACK, N.J. - Master Bond has introduced EP44 a new two component epoxy adhesive with a fast "3 minute" set for high performance general purpose bonding. Master Bond Polymer Adhesive EP44 gels in about 3 minutes and cures within a few hours at ambient temperatures to develop a high bonding shear strength of more than 3150 psi. The bonding strength is relatively insensitive to cleaning procedures. EP44 Bonded parts can be safely handled within a half hour. It produces durable high strength and tough bonds which are remarkably resistant to thermal cycling and chemicals including water, oil and most organic solvents, over the exceptionally wide temperature range of -60°F to more than 250°F.

Related Stories

Master Bond EP44 adheres well to metals, glass, ceramics, wood, vulcanized rubbers and many plastics. The hardened adhesive is a superior electrical insulator (volume resistivity, >1015 ohm-cm). It is recommended for use in the electronic, electrical, computer, construction, metalworking, appliance, automotive and chemical industries. It is suggested that Master Bond EP44 be mixed in small quantities because of its fast gelling properties. It is highly recommended for production line assemblies and high speed bonding operations.

About Master Bond

Master Bond is a manufacturer of high performance adhesives, sealants, coatings, potting and encapsulation compounds and impregnation resins. The product line offers over 3,000 grades of specially designed formulations of acrylics, anaerobics, cyanoacrylates, epoxies, latex, polyamides, polyurethanes and silicone systems to provide an optimal solution for even the most extreme applications.

For further information please visit our website at www.masterbond.com or contact: James Brenner. Phone: 201-343-8983 Fax: 201-343-2132 E-mail: technical@masterbond.com.